Sale!

MagicFil Thermo PLA 2.85mm Grey 50 gram

$33.58Postcodes Exemption

-46%
10 weekly payments of $3.36 learn more

or 4 fortnightly payments of $8.40 with Afterpay More info

Available: In Stock

Free Shipping All over Australia

SKU: AST-18470 Category:

Description

MagicFil Thermo PLA is based on our EasyFil PLA compound, but with a touch of thermochromic magic added, as MagicFil has a colour changing ability when heated above 29° C. MagicFil’s anthracite grey colour will change into a natural PLA colour when the material reaches a temperature of 29° C or above.
Being based on our EasyFil PLA compound make MagicFil Thermo PLA a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. MagicFil Thermo PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make it an extremely easy to print filament.

Unique features

  • Colour changing ability from anthracite grey to natural PLA at 29° C
    • Anthracite grey colour < 29° C > natural PLA colour
  • Very easy to print
    • Warp-free printing and no deformation after cooling
    • Improved flowing behaviour and inter-layer adhesion
    • Good first layer adhesion to several (un)heated print surfaces
  • Slightly softer than standard PLA resulting in improved strength and impact resistance
  • Almost odourless processing/printing
  • Biodegradable

General printing guidelines *

Nozzle size: ≥ 0.15mm

Layer height: ≥ 0.1mm

Flow rate: ± 100%

Print temp: ± 200 – 230° C

Print speed: Medium

Retraction: Yes ± 5mm

Heat bed: ± 0 – 60° C

Fan speed: 50-100%

Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 1.24 g/cc

50 gr coil

0.5 Kg spool

Ø 1.75mm

± 16.8m

± 168m

Ø 2.85mm

± 6.3m

± 63m

Product export information

HS Code: 39169090

Description: Monofilament

Country of origin: the Netherlands

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Additional information

Weight0.06 kg
Dimensions19 × 19 × 1.5 cm

Ships: We have a guarantee the next day dispatched after order confirmation with an exception for Sunday and regional or national holidays. Shipping all over Australia.

Returns: Return needs to be initiated within 7 days after the product delivery for all products.

For more details on the shipping and returns policy, please visit our FAQ’s. page

Care Instructions:

  • Wipe it clean with a dry fabric.
  • Try not to utilize water.
  • Wipe any spills right away.
  • Shading/clean can blur because of delayed introduction to daylight.

Warranty:

24 Months' Warranty for Wood termite Resistance.
⦁ The item comes with a 24-month warranty against any manufacturing defects in the materials that have been used.
⦁ The warranty doesn't cover damages due to usage of the product beyond its intended use and wear & tear in the natural course of product usage.
⦁ Any adjustments or changes made to the items post buy are not suggested and will void the whole Warranty.

MagicFil Thermo PLA 2.85mm Grey 50 gram